Baru Webcam & driver kamera digital Untuk Nikon

Perbaikan: - kinerja Autofocus telah meningkat untuk akuisisi fokus lebih dapat diandalkan pada subjek yang dituju, mengurangi jumlah kasus di mana fokus pada subjek itu tidak diperoleh atau fokus diakuisisi pada latar belakang saat shutter-release...

Perubahan dari Firmware Versi 1.1 ke 1.2: - Memperbaiki masalah yang menyebabkan berkas berjumlah diatur ulang ke 0001 ketika semua gambar dihapus bahkan jika pengaturan tidak pernah ulang menggunakan Reset semua. - Memperbaiki masalah yang dalam kasus...

Perubahan: - AF-P DX NIKKOR 18 & ndash; 55 mm f / 3.5 & ndash; 5.6G VR dan AF-P DX NIKKOR 18 & ndash; 55 mm f / 3.5 & ndash; lensa 5.6G sekarang didukung. pengurangan getaran dapat diaktifkan atau dinonaktifkan menggunakan opsi VR Optical baru di MENU...

Perubahan: - AF-P DX NIKKOR 18 & ndash; 55 mm f / 3.5 & ndash; 5.6G VR dan AF-P DX NIKKOR 18 & ndash; 55 mm f / 3.5 & ndash; lensa 5.6G sekarang didukung. pengurangan getaran dapat diaktifkan atau dinonaktifkan menggunakan opsi VR Optical baru di MENU...

Perubahan: - AF-P DX NIKKOR 18 & ndash; 55 mm f / 3.5 & ndash; 5.6G VR dan AF-P DX NIKKOR 18 & ndash; 55 mm f / 3.5 & ndash; lensa 5.6G sekarang didukung. pengurangan getaran dapat diaktifkan atau dinonaktifkan menggunakan opsi VR Optical baru di MENU...

Fixes: - Addressed the following issues, which in rare circumstances would occur when the eye sensor was used to switch between the monitor and electronic viewfinder displays: “Images would not display or be saved correctly “ and “The...

Fixes: - Addressed the following issues, which in rare circumstances would occur when the eye sensor was used to switch between the monitor and electronic viewfinder displays: “Images would not display or be saved correctly “ and “The...

Changes from “C” Firmware Version 1.10: - Commander mode can now be selected for Custom Setting e3 (Optional flash) when an optional SB-500 flash unit is attached. - The Auto and Flash white-balance options can now be used with the LED light...

Changes from “C” Firmware Version 1.10: - Commander mode can now be selected for Custom Setting e3 (Optional flash) when an optional SB-500 flash unit is attached. - The Auto and Flash white-balance options can now be used with the LED light...

Fixes: - Camera operation is now more reliable.Check Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the setup menu to display the camera firmware version. - Check the camera firmware version. -...